Polymer-Modified Tile Adhesive
High-bond powder adhesive for tile and stone installation.
This polymer-modified adhesive is what actually keeps a tile installation performing years later, not just on installation day — it's mixed with water on site, combed onto the substrate, and forms a strong, flexible bond that holds ceramic, porcelain or natural stone in place under normal building movement and thermal cycling. It's the same adhesive family used behind our own agriculture and stone product lines when tiling display or facility floors. Typically classified under EN 12004 (C2 or higher for demanding applications), mixed with water to a lump-free paste and combed on within its stated open time.
Technical specifications
- Type Cement-based polymer-modified adhesive
- Form Powder, mix with water on site
- Key benefit High bond strength, flexible cure
- Typical use Tile & natural stone installation, indoor & outdoor
Features
- High bond strength on floors and walls
- Suited to ceramic, porcelain and natural stone
- Workable open time for large-format tiles
- Cement-based — just add water
Used in
Ordering guide: Polymer-Modified Tile Adhesive
For a Polymer-Modified Tile Adhesive quotation, state the structure type, project conditions, approximate consumption and delivery location, and ask for the product's technical data sheet (TDS). Common uses: Interior & exterior tiling, Natural stone installation, Large-format porcelain slabs, Renovation over existing tile.
Compatibility with the substrate, the project materials and site conditions matters for every product. Before large-volume use, apply a trial sample and follow the manufacturer's application and storage instructions. For concrete projects, also get the mix-design report from your consultant or laboratory.
